Rack and Rack Accessories

Power Conditioner

Furman M-8Dx Power Conditioner with Lights and Voltage Meter
Product Description

A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8Dx into the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8Dx features two slide out, swiveling light fixtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level. The M-8Dx also features a bright red, three-digit LED voltmeter that displays incoming voltage.

When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. It keeps your equipment safe and sounding clean, while the digital voltmeter lets you monitor incoming voltage. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.

Highlights

  • AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
  • Spike & surge protection ensures equipment stays safe and your power stays clean
  • 9 total outlets - 8 rear panel outlets and 1 front panel convenience outlet
  • Digital voltmeter display incoming line voltage
  • 15 amp rating with circuit breaker
  • Front panel indicator LED lets you know that your equipment is being protected
  • Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters
  • 3 year warranty
When should I use this product?
Product Specifications
  • Maximum output current: 15 amps
  • Line cord: 6 ft., captive, 14 AWG, with 3-conductor Edison plug
  • Lamps: two 120V incandescent bulbs, 4 watts each
  • Operating voltage: 120 VAC, 60 Hz
  • Spike protection mode: Line to neutral
  • Energy dissipation: 170 joules
  • Peak impulse current: 12,000 amps
  • Maximum continuous operating voltage: 130 VAC RMS
  • Let-through voltage (@ 125 amps, 8/20uS waveform): 400 volts
  • Noise attenuation: Transverse mode: >23 dB, 200 kHz to 10 MHz
  • Dimensions: 1.75" H x 19" W x 7.5" D
  • Weight: 5.8 lbs
  • Three-year limited manufacturer's warranty
Downloads